Automatic Voltage Stabilizer Solves Unstable Voltage And Unbalanced Three-phase Voltage In Factories

Now factories are all mechanized, and mechanical equipment must have Automatic Voltage Stabilizer, and the quality of power supply directly affects the working efficiency of the machinery. The factory is most afraid of power outages. Once a power outage occurs, all production links will be stopped, causing delays in production progress. If the three-phase power is unstable, it can also affect production efficiency, and serious mechanical equipment can be burned. If the voltage is too low, only 330v or even lower, the current is definitely not enough, the equipment will not work, affecting the progress of processing and production. The high-frequency intermittent instability of the three-phase voltage has the greatest impact on the equipment, which is easy to burn the equipment and cause the product qualification rate to drop. Sometimes there is an unbalanced three-phase voltage. One phase voltage is as low as about 180V, and the other two phases are as high as about 260v. What causes this? First, investigate the neighbors around you. If this problem only occurs in your home, then check your line. Generally, the unbalanced three-phase voltage is not caused by the imbalance of power consumption of a single user, but by the overload of one phase of power consumption of all users under the same substation, but generally such a situation is rare. Unless your substation is too old and the capacity is too small. Low three-phase voltage is generally caused by the line being far away from the transformer, or the wire diameter of the equipment being small and not thick enough.