Precautions For Using Wide Range Voltage Stabilizer

 Precautions for using Wide Range Voltage Stabilizer

1. Do not overload, **70% for wide range voltage stabilizer, 50% for low voltage places**;

2. Input and output connection wires must meet the rated requirements;

3. Please carefully connect the input wiring of the voltage stabilizer and the output wiring of the voltage stabilizer;

4. The output voltage of the instrument and the voltage stabilizer should be unified;

5. Please choose the input voltage switch to match the voltage stabilizer switch current; be sure to use D-type circuit breaker;

6. If the fuse burns out or the switch trips, please check the load equipment power. In order to extend the service life of the voltage stabilizer, we do not recommend that the wide range voltage stabilizer work at full load;

7. Use the same rated fuse, and do not use non-rated fuses or wires;

8. Install in a dry and ventilated place; leave one meter of space around the equipment for future maintenance;

9. Dust removal every six months.