What Are The Precautions For Using A Three-phase Voltage Stabilizer

What are the precautions for using Automatic Voltage Stabilizer? What aspects should be considered?

In industry or commercial use, three-phase voltage stabilizers are often used as voltage stabilizers to protect the normal and undisturbed use of equipment during the power consumption process and extend the service life of the equipment. However, in the process of use, in order to extend the life of the three-phase voltage stabilizer or achieve the actual effect of the three-phase voltage stabilizer, the following precautions need to be understood.

First of all, if the fuse burns out, the load equipment must be verified immediately, and then timely repair measures must be taken to restore power. Secondly, if a fixed-rate fuse is used, the specified line must be used, and it must not be matched at will to avoid causing greater damage. Third, do not use excessive debt under specified conditions to avoid accidents. Fourth, in the preparation process, first select the input voltage switch to ensure that it is consistent with the power supply voltage. Fifth, it is necessary to have a unified output voltage of the instrument and the voltage stabilizer, otherwise the circuit will be very disordered, and it will not be conducive to the input and output of the voltage. Sixth, use a long enough wire to avoid timely repairs in case of accidents. Deqi must be careful to connect the input and output, and never damage the equipment, causing trouble to the installation. Finally, the installation location of the three-phase voltage stabilizer must be selected in a dry and ventilated place, especially in the relatively humid places such as the south. If these electrical equipment are in this position for a long time without drying, it is easy to damage the equipment and shorten the service life of the equipment.

It can be seen that the three-phase voltage stabilizer needs to pay attention to events during use. There are many things that cannot be lost or ignored in order to extend the service life of the three-phase voltage stabilizer and achieve the use function of the three-phase voltage stabilizer.