Wide Range Voltage Stabilizer Solves The Problem Of Unstable Voltage In Laser Cutting Machine

I have a friend who bought a Wide Range Voltage Stabilizer from our company and successfully solved the problem of unstable voltage when using the laser cutting machine. He has been doing sheet metal for 6 years. He is from a business background. After working in a large company for 2 years, he started a small factory by himself. He mainly makes racks, chassis, cabinets, and hardware orders. He has not made much money in the past few years and can only maintain the wages of workers and factory expenses. Because he does not want to give up old customers for many years, he has persisted until now. After receiving a large order for smart scanning code car washing machines at the end of last year, he was forced to buy a brand new 1200w Hongshan laser cutting machine. The new machine costs 480,000 yuan, but he only paid 200,000 yuan to the manufacturer. 40% down payment to open a new machine, and the rest of the money is paid slowly. If you don’t pay, you can’t get the unlock code of the system next month, and the laser cutting machine cannot be used. Before, all the sheet metal cutting parts in his factory were outsourced to others for cutting. Although the cost was lower, it was very troublesome when the deadline was tight, the drawings were temporarily changed, and the parts needed to be supplemented. It was common to lose customers due to delays in the deadline. Now there is no order for 120 car washers, so it is necessary to buy a laser cutting machine. The salesperson and the operation trainer suggested that he should equip the laser cutting machine with a voltage stabilizer, but he thought it was a tied consumption and did not equip it with a voltage stabilizer due to insufficient funds. After more than a month, when cutting the 12-centimeter iron plate, problems developed. He cut half of the plate when he got off work and went off work. He went to work at night and cut the remaining half, but after cutting, he found that there was no problem with the half cut in the afternoon, but many of the edges of the half cut at night were not cut off, and all the sharp corners were burned and melted, so the latter half was equivalent to scrap. After consulting, it was learned that the cause was unstable voltage, and the manufacturer recommended 2 brands of voltage stabilizers to him. I have been a professional voltage stabilizer manufacturer for 15 years, and we have been friends for many years, so he thought of me first. I recommended a wide-range voltage stabilizer and quoted a more affordable price. My price for a voltage stabilizer of the same power was 2,000 yuan lower than the manufacturer's recommendation. In the end, he bought a wide-range voltage stabilizer from me, which effectively solved the problem of unstable voltage when using the laser cutting machine.