Are The Steps For Installing A Static Voltage Stabilizer Complicated?

Voltage stabilizer: It is divided into two categories: AC voltage stabilizer (AC voltage stabilizer) and DC voltage stabilizer (DC power supply). So, is the installation step of Static Voltage Stabilizer complicated? Today we will talk about the installation steps of static voltage stabilizer.

1. First, connect the input of static voltage stabilizer to the distribution board, and install the corresponding fuse on the distribution board to ensure the safety of electricity use.

2. Connect the power supply of the electrical equipment to the output terminal of the voltage stabilizer. The rated input voltage value of the electrical equipment should be consistent with the output of the static voltage stabilizer.

3. Turn on the power switch, and the working indicator light is on. Observe whether the voltage meter indication value is normal. If it is normal, turn on the power switch of the electrical equipment. The voltage stabilizer can automatically adjust the voltage and supply power normally.

4. If the electrical equipment is not used for a long time, please turn off the power switch to reduce power consumption and extend the service life of the static voltage stabilizer.

5. When selecting electrical appliances such as refrigerators, air conditioners and other inductive load devices with motors, a static voltage stabilizer with a capacity of more than three times should be selected to prevent the starting current of the equipment from exceeding the fuse current of the voltage stabilizer or the current of the overcurrent protection circuit breaker, causing the fuse to blow or the circuit breaker to trip or the voltage drop to be too large to work.

6. The wires connected to the voltage stabilizer should have sufficient load surface to prevent heating and reduce voltage drop.

7. After connecting all input/output lines, turn off the power switch of the load first, then turn on the static voltage stabilizer, check that the output voltage is normal, and then turn on the power switch of the load (it is strictly forbidden to start the voltage stabilizer with load).

8. When using a static voltage stabilizer, remember to maintain and service it regularly to avoid major failures.