What Should I Pay Attention To Before Installing A Dynamic Voltage Stabilizer?

1. Check whether the model and specifications of the Dynamic Voltage Regulator (DVR) product are consistent with the ordering information, especially the capacity, output/input voltage value, etc.

2. Check whether the electrical components in the voltage stabilizer cabinet are damaged during transportation

3. The fasteners of the voltage stabilizer must be firm and reliable, and the wiring is not allowed to fall off. If it falls off, it must be tightened, especially the control plug-in cannot be loose or have poor contact

4. After the voltage stabilizer arrives, please unpack and inspect and install it within one month to avoid long-term storage of the product and affect the quality

1. Before installing and wiring, be sure to cut off the power supply to prevent electric shock and injury accidents

2. The product must be installed and tested by personnel who have received professional training and are qualified as electricians

3. When wiring, be sure to connect according to the markings on the wiring terminals. Do not reverse the output and input

4. Do not reverse the neutral wire and the phase wire

5. Do not reverse the neutral wire and the ground wire (low-quality voltage regulators do not care)

6. Do not connect the wrong wires. If one section is connected incorrectly, it is easy to cause damage to the machine or malfunction

Pay special attention to non-related technical personnel, do not connect to avoid injury or major losses.